|
North
Stone
FACT FILE
PHOTOS
Origin: Italy
Colours: Bergen (golden/sandstone)
Molde (grey/brown rock)
Holme (concrete
grey)
Asker (red/brown brick)
Feren (charcoal grey/slate)
Narvik
(limestone white)
Sizes: 150 x 150mm 300 x
300mm 300 x 600mm 600 x 600mm
Crazy Pave:
580 x 580 on mesh in 3 proposals
Thickness: 12mm
Finishes:
Natural surface (in & out) & Lappata surface
(indoors)
Type: Fully vitrified, unglazed
Appearance: Looks like real stone, slight natural
shade & surface variation
Production: Double-pressed, rectified edges
Technical: Water Absorption less than 0.05%
Frost Resistant (-35C)
Scratch Resistant
Surface Hardness MOHS 8 (of 10)
Stain Resistant (hot running water)
Breaking
Strength 535Kg/cm2
Slip
Resistance: Lappata Finish – R9
& Natural Finish – R12
European Standard (DIN 51130) R12 (DIN 51097) B
Australian Standard AS/NZS 4586-1999
· Average Coefficient of
Friction by Dry Floor Test - 0.74
· Classification according to
Dry Floor Friction Test - F
· Contribution to the risk of
slipping when dry
- Moderate to Very Low
· Average Pendulum Number
achieved by Wet Test - 46
· Classification according to
Wet Pendulum Test - W
· Contribution to the risk of
slipping when wet - Low
General: This
innovative porcelain result achieved by the new
“DOUBLE PRESSED” technology, obtains the flashing
effects of natural stone by dry-application of the spray-
dried porcelain stoneware powders. This effect, together
with and different structured surfaces, makes North Stone
as beautiful as natural stone.
Applications: Commercial & residential in and out doors, including
pedestrian walkways,
foyers, food courts, shopping
centres,
courtyards, drive ways, step treads and pool
surrounds (with lamination and
various edge detail finishes
being achieved)
|