|
Rox Panels
FACT FILE
PHOTOS
Origin:
China
Colours:
Beige/Yellow Limestone
(warm gold & white tones)
Yellow Limestone
(golden yellow stone)
Black Slate
(black,
grey & tan tones)
Picture Stone
(rustic
gold, tan & rust colours)
Sizes:
610 x 152 mm
Thickness:
35mm or 50mm – depending on finish.
Finishes:
Chisel surface finish (35mm thickness)
Cliff surface finish (35mm
thickness)
Natural surface finish (50mm
thickness)
Appearance:
Natural rock stacked, with natural shade & surface variation
Production:
Small pieces of rock epoxy glued together to make a panel.
Technical:
Laying Rox Panels On Vertical Surfaces:
1.
Substrate must be rigid and suitable to hold
weight.
2.
Clean vertical surface.
3.
Water proof surface with appropriate product if required.
4.
Prepare tile adhesive mix.
5.
When using panels as water
feature, ensure the adhesive is suitable for immersion in water.
6.
Use an off white adhesive for lighter coloured panels.
7.
Apply adhesive to back of panel using not less than 8mm trowel.
Ensure adhesive fills
all depressions & covers panel.
8.
Firmly press panel into position using brick bond pattern.
9.
Do not grout.
10.
Sponge off residue tile adhesive immediately.
11.
It is recommended that natural stone is sealed with a penetrating sealant to protect the stone surface.
General:
Rox Panels is a new concept in ‘stack stone cladding’
enabling a surface to be simply clad with
stone instead
of being built
from stone. The panels
are split on the face
and sawn finished on the
back. Now you can create the
natural effects of rock
walls, which appear more
than
skin deep.
Applications: Suitable for
commercial & residential exterior and interior
wall,
column and feature cladding, including foyers,
shopping centres, restaurants, courtyards, living areas
and
pool
features. (with
mitered corners being achieved
through
cutting of the panels)
|
